mobile-booster-mumbai

Acessories

RF Connector

rf-female-connector rf-female-connector

N Male crimp right angle Connector
Frequency Range- DC-3GHz/6GHz/11GHz
Characteristic Impedance- 50ohm
VSWR =1.20
Contact Resistance inner conductor: =10mO
outer conductor: =2.5mO
Dielectric Withstanding Voltage =2500V
Cable –LMR600, LMR500, LMR400, LMR300,LMR240,
LMR200, RG223, RG8, RG6,

rf-male-connector rf-male-connector

N Female crimp Connector
Frequency Range- DC-3GHz/6GHz/11GHz
Characteristic Impedance- 50ohm
VSWR =1.20
Contact Resistance inner conductor: =10mO
outer conductor: =2.5mO
Dielectric Withstanding Voltage =2500V Cable –LMR400, LMR300, LMR240, LMR200, RG8, RG6,etc.

RF Cable

R/F 400 coaxial cable : R/F 400 cable connects the outdoor antenna to the amplifier, and a R/F 400 cable connects the amplifier to the indoor antenna.

LMR-400-cable LMR-400-cable

LMR 200 cable
Frequency Range- DC-3GHz/6GHz/11GHz
Characteristic Impedance- 50ohm
VSWR =1.20
Contact Resistance inner conductor: =10mO
outer conductor: =2.5mO



LMR-200-cable LMR-200-cable

LMR 400 cable
Frequency Range- DC-3GHz/6GHz/11GHz
Characteristic Impedance- 50ohm
VSWR =1.20
Contact Resistance inner conductor: =10mO
outer conductor: =2.5mO
Dielectric Withstanding Voltage =2500V Cable –LMR400, LMR300, LMR240, LMR200, RG8, RG6,etc.

1/2-inch-cable 1/2-inch-cable

1/2 inch cable
Frequency Range- DC-3GHz/6GHz/11GHz
Characteristic Impedance- 50ohm
VSWR =1.20
Contact Resistance inner conductor: =10mO
outer conductor: =2.5mO
Dielectric Withstanding Voltage =2500V Cable –LMR400, LMR300, LMR240, LMR200, RG8, RG6,etc.

Antenna

High gain outdoor Antena : This antenna is mounted outside and receives the mobile phone signal. The antenna is directional, and so is designed to point toward the nearest mobile phone mast to receive the maximum signal possible. Indoor antenna (7.5dBi) : The indoor antenna rebroadcasts the boosted signal. Unlike the outdoor antenna, this one is Patch-directional, and so broadcasts signal equally in directions. It is therefore designed to be placed in any wall where you wish to receive signal improvement.

Omni-Antenna Omni-Antenna

Omni Antenna/ Ceiling Mount Antenna Frequency – 800 -2500Mhz
V.S.W.R – ≤1.5
Gain – 3dbi / 4Dbi / 5Dbi / 7Dbi
Band Width- 136/790-MHz
Impendence- 50 ohms
Polarization- vertical
Connector- N female or CConnector- N female or Customized


Indoor-patch-panel Antenna Indoor-patch-panel Antenna

Indoor patch panel Antenna
Frequency – 800 -2500Mhz
V.S.W.R – ≤1.5
Gain – 7Dbi / 8dbi/ 10 ± 1 DBI
Band Width- 136/790-MHz
Impendence- 50 ohms Polarization- vertical
Connector- N female or Customized


Splitters

2way-splitter 2way-splitter

2 Way Power Splitter
Frequency – 800-2500MHz
Average Power - 200W
Splitter Type – 2 way cavity Type
Connector Type- N Female
Ingress Protection- Indoor
3rd Order IMD(dBc) - NO IM3
Dimension - 210.6x60.2x25 Net Weight - 160g


3way-splitter 3way-splitter

3 Way Power Splitter
Frequency – 800-2500MHz
Average Power - 200W
Splitter Type – 3 way cavity Type
Connector Type- N Female
Ingress Protection- Indoor
3rd Order IMD(dBc) - NO IM3
Dimension - 235.2x60.2x25
Net Weight - 180g

4way-splitter 4way-splitter

4 Way Power Splitter
Frequency – 800-2500MHz
Average Power - 200W
Splitter Type – 4 way cavity Type
Connector Type- N Female
Ingress Protection- Indoor
3rd Order IMD(dBc) - NO IM3
Dimension - 235.2x60.2x25
Net Weight - 200g


Coverage area is based upon a minimum outside signal strength of 65% or better. As outside signal strength decreases, coverage area decreases. If there is no signal outside, this unit will not give you any improvement in coverage.

We perform installations, custom design engineering and site surveys anywhere in India - Call Us For More Details- 097680 00884 We can help you make the right decision.

gsm-booster cdma-booster 3g-booster omni-antenna panel-antenna